- SKU:
- 77130539
- Weight:
- 2.60 LBS
- so_moq:
- 1
- so_qi:
- 1
- Estimated Special Order Ship Date:
- Special Order (ships approximately 2 Weeks)
- Special Order Available:
- Increments of 1
- QPO:
- 0
- MPN:
- 387780
The Alemite CLS (Centralized Lubrication System) 1000 Controller is the centerpiece of Alemite’s centralized lubrication solutions. The CLS 1000 Controller can operate, control, and monitor injector systems, series progressive valve systems, and dual line systems.
PRODUCT FEATURES:
- 110 Vac, 230 Vac, or 12/24 Vdc input power options with same unit to serve a variety of applications and reduce inventory cost
- Removable terminal block for ease of wiring
- Removable plate for adding splash-proof strain relief after wiring to maintain housing integrity
- Easy programming saves valuable setup time
- Easy single-level navigation. No need to drill down
- One-button start function no matter where you are in the program
- Non-volatile data storage to ensure proper lubrication even after power outages or idle periods
- Lightweight (only 2 lbs.) and small enough to fit wherever you need it
- 2-line, 16-character, backlit LCD display
- Tested to MIL vibration standard
- External relay contact rated at 10A for controlling most pumps
- Status LEDs to keep your lubrication system running smoothly
PRODUCT SPECIFICATIONS:
- Alemite Part No.: 387780
- Input power: 85-135 Vac/0.2 amp, 170-265 Vac/0.1 amp, 10-30 Vdc/0.4 amp
- External pump load: 10 amp relay output (external fused)
- Enclosure: NEMA 4X polycarbonate with transparent cover (Note: Modifications made to the NEMA 4X enclosure may void rating)
- Operational temperature range: 0 to 120° F (18° C to 49° C)
- Storage temperature range: -10 to 160° F (23° C to 7° C)
- Net weight: 2 lbs. max
- Mounting: Wall mount within 6.9” (horizontal) x 5.0” max footprint, 3.5” depth
- LCD display: 2-line, 16-character, backlit
- LEDs: POWER: green; lights when power applied, LUBE: yellow; lights when cycle initiated, FAULT: red; lights when end-of-cycle switch input is not cycled before unit exceeds time allowed by the user program
- Lube on/idle time: 1 to 9999 seconds, minutes, hours, or counts
- Timing accuracy: 0.01%
- Input (lube) count rate: 10 Hz max.
- Pulsed output (on-time): 1 to 99 seconds
- Pulsed output pump cycles: 1 to 99 cycles
- Cycle switch counts: 0 to 99 counts
Product Condition: NEW