Shopping Cart: $0.00

Dynalco SPD-100L Signal-Powered Digital Tachometer Gauge 4-Digit

More Views

Dynalco Signal-Powered Digital Tachometer 4-Digit - SPD-100L

Product Condition: NEW
Dynalco SPD-100L Signal-Powered Digital Tachometer 4-Digit
Estimated ship date: for orders by 3pm PT/6pm ET today Available for back order.

SSL Cerficate

The Dynalco SPD-100L Signal-Powered Digital Tachometer is a well-sealed signal-powered tachometer designed for rugged indoor and outdoor applications. This solid-state tachometer gauge comes in 4-digit, lighted LCD display with gate time range (0.26 to 5.70 seconds) field-programmable.


  • Signal and power derived totally from magnetic pickup or pulser.
  • Intrinsically safe. Can be used in hazardous environments with approved Dynalco pickups.
  • No power supply connections. High immunity to electrical noise.
  • Can be field-calibrated.
  • High accuracy: 1 rpm resolution.
  • High shock and vibration resistance.
  • Standard SAE case size fits panels with 3-3/8 inch (86 mm) openings.
  • Gasketed and spray-proof.
  • Ideal for OEM use.
  • Can be paralleled with governors and/or speed switches.
  • Can share existing pickups or pulsers; draws only microamperes.
  • Ground-free terminals have no polarity; easy installation.

Product Specifications:

  • Part No.: SPD-100L
  • External Power Requirements: All models are signal-powered. Lighted versions: 12 or 24 Vdc, depending on model.
  • Display: Four active digits (0 to 9999), non-blinking LCD display; character height of 0.5 inches (14 mm). Display contrast increases with increasing ambient light.
  • Input Valve Voltage: From pickups, pulsers, shaft encoders, etc. Minimum signal amplitude: 2.5 Vrms. Maximum permissible signal: 15 Vrms. The SPD-100 automatically limits pickup signals at approximately 10 volts peak-topeak. Input impedance is 100 ohms in series with a 6 volt Zener diode.
  • Input Signal Frequency: Maximum input signal frequency of 20,000 Hz. Lowest frequency range limited by gate time and corresponding numerical display.
  • Isolated Circuit: All circuitry is totally floating, i.e. totally isolated and insulated from the case and from ground.
  • Operating Temperature Range: –5°F to +175°F (–20°C to +80°C). Storage: –40°F to +195°F (–40°C to +90°C).
  • Vibration: MIL STD 810C; Method 514.2; Curve Q; Procedure V; Modified to 500 Hz upper limit. 5 Hz to 10 Hz @ 0.2 inches D.A.; 10 Hz to 18 Hz @ 1.0 g (peak); 18 Hz to 57 Hz @ 0.06 inches D.A.; 57 Hz to 500 Hz @ 10 g (peak).
  • Accuracy: One rpm resolution; within 0.5% (0.1% typical at room ambient) under all combined environmental conditions.
  • Gate Time Ranges: SPD-100 Series: field-selectable from 0.26 to 5.7 seconds. SPD-108 Series: field-selectable from 0.13 to 2.85 seconds. This accommodates calibrations for an extremely broad range of corresponding pulses per second.
  • Magnetic Pickups: Dynalco Magnetic Pickups M102 and M107 are used with the SPD-100 Series in most applications. For low-speed applications, or to permit operation with larger gaps, the ultrahigh sensitivity M142 can be used. For intrinsically safe applications Dynalco Controls offers various models, with the M202 and M134 the most frequently used.
  • Weight: 1 lb (0.45 kg)


Additional Information

Product Condition NEW
upc No

Customer Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register