ENM Hourmeter 10-80V Quartz - T41D45

ENM’s T41D45 10 to 80 VDC Hour Meter is the answer to applications requiring a low power, low-cost reliable hour meter that is compatible with nearly any DC installation. The T41D45 input is polarity insensitive and has a quartz-crystal timebase that ensures accurate long-term timekeeping.  This tamper-proof meter is sealed to provide years of service. No battery is required to maintain elapsed time - accumulated hours are stored in the mechanical indicating counter.


PRODUCT FEATURES::

• commercial/bulk product.  No box or instructions are provided
• Made IN the USA
• Solid-State Electronics Drive Circuit
• UL & CSA Recognized
• CE Recognized and Approved
• Quartz Crystal for Accurate Timing
• No Battery Backup Required
• Absolutely Will Not Lose Count
• Quiet Operating
• Totaly Sealed
• Indicates Operating Time in Hours and Tenths
• High Impact, Tamperproof Plastic Case

PRODUCT SPECIFICATIONS::

• Display:  6-digits 99,999.9 hours - Automatic recycle to zero. 
• Hours:  white on black
• Tenths: red on white
• Height:  .125“
• Mounting:  Front panel mounts with push-on retaining clip
• Operating Voltage: 10 - 80 VDC (compatible with 12 and 24 VDC systems
• Efficiency: Less than 0.03 watts at 12 VDC, 0.7 watts at 28 VDC
• Temperature: Standard -30ºC to +65ºC(-22ºF to +149ºF)
• Configuration: Front panel mounts with push-on retaining clip
• Termination: 1/4" male blade terminals
• Vibration Resistance: Withstands 10 to 75 Hz @ 1 to 8 G’s
• Accuracy: Better than +/- 0.01% over entire range
• Vibration Resistance: Withstands 10 to 75 Hz @ 1 to 8 g’s
• Replaces Hobbs 82320