Shopping Cart: $0.00

Blue Sea Systems Automatic Charging Relay 7601

More Views

m-Series 65A Automatic Charging Relay 12/24V DC 7601 - Blue Sea Systems

Product Condition: NEW
Blue Sea Systems Automatic Charging Relay 7601
Estimated ship date: for orders by 3pm PT/6pm ET today Available for back order.

SSL Cerficate

The Mini Automatic Charging Relay (M-ACR) is designed to manage the charging current from alternators up to 65 Amps found on most outboards and many inboard engines. The compact design allows for three mounting styles: surface, rear, or panel mount. The M-ACR is also available as a module in a Custom 360 Panel.

Start Isolation (SI) protects sensitive electronics by temporarily isolating house loads from the engine circuit during engine cranking, protecting the house circuit from voltage sags and spikes.



  • Senses charging on two battery banks
  • Pull off and snap on insulating cover
  • LED indicates ACR status
  • 1 ∕4" x .032" male quick connect terminal for ground
  • 7∕ 16" (11 mm) stud length to accept multiple cable terminals
  • Waterproof – rated IP67 for temporary immersion
  • Lifetime replacement warranty



  • Part No.: 7601
  • Nominal Voltage: 12V DC • 24V DC
  • Start Isolation: Yes
  • Amperage Operating Current: 90mA (Combine) • 15mA (Open)
  • Continuous Rating: 65A
  • Intermittent Rating: 115A (5 min)
  • Cable Size to Meet Ratings: 6 AWG
  • Maximum Cable Size: 1/0 AWG
  • Terminal Stud Size: 1/4" - 20 (M6)
  • Terminal Stud Torque: 60 in-lb (6.78 Nm)



  • Combine 30 sec: 13.6V DC
  • Open 10 sec: 12.35V DC
  • Open 30 sec: 12.75V DC
  • Open High: 16.0V
  • Under Voltage Lockout: 9.5V
  • Weight: 0.95lb (0.43 kg)


Additional Information

Product Condition NEW
upc 632085076016

Customer Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register