Shopping Cart: $0.00

Murphy 0-200 PSI Surface Mount Swichgage Instrument 45APE-A-200

More Views

Murphy 0-200 Surface Mount Swichgage Instrument - Square Case - 45APE-A-200

Product Condition: NEW
Murphy Surface Mount Swichgage Instrument 0-200 PSI with Bronze Bourdon Tube 45APE-A-200
Estimated ship date: for orders by 3pm PT/6pm ET today Available for Special Order

SSL Cerficate

The Murphy 0-200 PSI Surface Mount Swichgage Instrument with Square Case 45APE-A-200 is a mechanical gage for pressure indication. It includes 2 adjustable SPDT switches. These snap-acting switches can be used for start and stop, to trip alarms and to shut down equipment. The 45APE Series utilizes a bourdon tube sensing unit with a stainless steel dual-sector geared movement. Each of the sectors drive separate pointers when pressure is applied to the bourdon tube. The indicating pointer (visible pointer) shows actual pressure reading, including below and beyond the low and high trip points. The low and high trip points are adjustable independently on the gage front lens.

The switch operator pointer (behind the dial) is calibrated to follow the indicating pointer. The low and high trip point indicators “arrest” the switch operator pointer, and as pressure decreases or increases, through “the principal of lost motion” the respective snap-switch is tripped. The 45APE Series models are widely used in applications requiring pressure indication and Form “C” low and high pressure switches.



  • Surface Mount Version (square case)
  • 4-1/2 in. (114 mm) Diameter
  • Combination Indicating Gage with Independent Low and High Snap-Acting Switches
  • Field-Adjustable and Highly Visible Low and High Pressure Trip Point Indicators
  • Dual-Sector Geared Movement Allows for Full-Scale Indication and Set Point Control



  • Part No.: 45APE-A-200
  • Range: 0 - 200 PSI (0-1.38 MPa) [0 - 13.78 bar]
  • Dial: White on black, dual scale, psi and kPa standard, 4-1/2 in. (114 mm) diameter
  • Case: Die cast aluminum, surface mount
  • Overrange: Do not exceed 10% FS above full range
  • Process Connection: 1/4 NPTM thru 1000 psi
  • Sensing Element: Bronze bourdon tube
  • Socket: Brass std. <= 1,000 psi
  • Gage Accuracy: Indicating pointer within switch points with hysteresis of <1%: ±2% for first and last quarters of scale; middle half of scale is ±1%
  • Pressure Relief Disc: Back of case (except EX models)
  • Switch Reset Deadband: Approximately 10% FS
  • Snap-Acting Switches: 2-SPDT; 2 A @ 250 VAC
  • Wire Connections (Surface Mount): 1/2 NPTF conduit/ terminal block
  • Item Weight: 5 lbs 6 oz (2.4 kg) approximately
  • Item Dimensions: 10 x 9 x 6 in. (254 x 229 x 152 mm) approximately

Additional Information

Product Condition NEW
upc No

Customer Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register