Shopping Cart: $0.00

Murphy Pressure Transmitter 1000 PSI PXT-K-1000

More Views

Murphy 1000 PSI Pressure Transmitter 4-20 mA with Flying Lead Connection - PXT-K-1000

Product Condition: NEW
Murphy 4-20 mA Pressure Transmitter 1000 PSI PXT-K-1000
Estimated ship date: for orders by 3pm PT/6pm ET today Available for back order.

SSL Cerficate

The Murphy 1000 PSI Pressure Transmitter PXT-K-1000 is a state-of-the-art instrument providing 4-20 mA output. This pressure transmitter is a two wire type with flying lead connection and contains a transducer comprised of a piezoresistive silicon chip mounted on a glass-metal feedthrough header welded into a stainless steel housing and filled with silicone oil; the very thin laser-welded stainless steel isolation-diaphragm completes the front side. Media pressure is transferred from the stainless steel isolation-diaphragm, via the oil inside the cell, to the silicon measuring chip. This construction, combined with the advanced internal signal conditioning circuitry, results in a rugged instrument with extremely small temperature error and class-leading EMI/RFI resistance.

The enclosure and all wetted parts are made of 316L stainless steel to meet NACE MR01-75. Applications: PXT-K Series Pressure Transmitters can be used in applications such as Compressors, Engines, Process Control, Liquid Level and Pumps.



  • 4-20 mA Output Signal
  • Piezoresistive Pressure Transmitter
  • Corrosion Resistant Construction
  • High Stability



  • Part No.: PXT-K-1000
  • Range: 1000 PSI
  • Operating Temperature: -40 to 180°F (-40 to 82°C)
  • Compensated Temperature Range: -20 to 160°F (-29 to 71°C)
  • Process Connection: 1/4 NPT female with 7/8” Hex Nut
  • Electrical Connection (PXT-K-XXX): 1/2” NPT Male Conduit connection with 60” long cable, vented
  • Enclosure: NEMA 4/IP65 or better
  • Body: 316L Stainless Steel. Meets NACE MR01-75
  • Wetted Parts: 316L stainless steel
  • Environmental Effect (Humidity): No effect for 0-95%, Non-condensing
  • Mounting: Transmitter can be installed in any axis
  • Transmitter position has negligible affect on performance as long as it is perpendicular to the flow being monitored
  • Shock Resistance: 1000g per IEC 60068-2-6 (Mechanical Shock)
  • Vibration Resistance: 20G per IEC 60068-2-6 (Vibration under resonance)
  • Wiring Protection: Protected against reverse polarity and short circuit, 48 VDC Maximum
  • Supply Voltage: 8 - 30 VDC (Typically 24 VDC)
  • Transmitter Output: 4-20mA, two wire configurations with load characteristics
  • Insulation: Greater than 10MΩ @ 300 VDC
  • Electromagnetic Compatibility (EMC): Standards; EN 61000-6-2:2005, EN 61000-6-3:2007, EN 61326-2-3:2006
  • Voltage Surge/Spike Protection: Protection against a 600
  • Volt spike per IEC 60-2
  • Shipping Weight: 6.5 ounces
  • Applicable Standards: NACE MR0175 Compliant with the requirements • CSA (c/us): Class I / II / III, Div 1 , Groups A-F T4 • Class I / II / III, Div 2, Groups A-D,F,G T4
  • ATEX: IBExU 10 ATEX 1124 X • II 1G Ex ia IIC T6-T4 • II 3G Ex nA IIC T6

Additional Information

Product Condition NEW
upc No

Customer Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register