Murphy Marine Compact Configurable HelmView Display HVS750

More Views

Murphy Marine Compact Configurable HelmView Display with 7 in. TFT LCD - Non-ABS - HVS750

Product Condition: NEW
Murphy Marine Compact Configurable HelmView Display Non-ABS HVS750
Estimated ship date: for orders by 3pm PT/6pm ET today Available for back order.
$2,316.33

SSL Cerficate

The Murphy Marine Compact Configurable HelmView Display Non-ABS with 7 in. TFT LCD HVS750 is a monitoring display specifically designed to meet the engine monitoring needs of the Commercial Marine industry. Its durable design and easy to use interface offers a complete view of your vessels engines. Monitor propulsion, auxiliary, transmission, and genset engines all on one display. It is equipped with the ability to switch between Day and Night mode operations and even has a blackout option. There are multiple screens to choose from and the ability to turn screens on/off to meet your specific marine application needs. The HelmView 750 has the ability to be connected to a video camera for monitoring the engine room or other important areas of the vessel.

This multi-functional display allows you to monitor multiple engines, transmissions, fuel usage, and more using only one device, thus greatly reducing operating costs. It has ten tactile push buttons that can easily be pressed with or without gloves. The HelmView 750's sunlight viewable, full-color screen makes seeing life-like gauges, alarm warnings, service codes, and video easy to view in virtually any condition. The HelmView 750 is fully programmed to display Diagnostic Trouble Codes showing critical alarms and text explanations. The HelmView 750 display is compatible with the PowerVision Configuration Studio so custom software configurations can be quickly developed. With the PowerVision Configuration Studio it is easy to define the user interface screens, monitoring requirements and specifications that are unique to the Commercial Marine industry. The HelmView 750 paired with the PowerVision Configuration Studio extends custom configuration from only monitoring to equipment control, data logging, and additional alarming. You can even add custom graphics and company branding to the user interface.

 

FEATURES:

  • Non-ABS
  • Video input
  • Blackout Mode Option
  • Rugged design that is simple to use
  • Configuration Software option offers virtually unlimited possibilities
  • Bonded 7-inch LCD screen viewable in direct sunlight
  • Customizable for additional Commercial Marine applications
  • Color display for modern electronic engines and vessel monitoring using SAE J1939 Controller Area Network

 

PRODUCT SPECIFICATIONS:

  • Model No.: HVS750
  • Part No.: 78700508
  • Display: 7” / 178mm color transmissive TFT LCD
  • Resolution: WGA, 800 x 480 pixels, 16-bit color
  • Aspect Ratio: 16:9
  • Orientation: Landscape
  • Backlighting: LED, 400-500 cd / mC (50,000 h lifetime)
  • Microprocessor: Freescale iMX.31 32bit, 400Mhz
  • QNX Operating System
  • Flash Memory: 2 GB
  • RAM: 128 Mbytes SDRAM
  • Operating Voltage: 8-35 VDC, protected against, reverse polarity and load-dump
  • Power Consumption: 10w full backlight; 22w full backlight with heater (at temperatures below -10 °C)
  • CAN: 3 CAN ports according to CAN specification 2.0A or 2.0B; one port isolated according to NMEA 2000 (GPS)
  • RS485: 1 MODBUS Master/Slave port, PVA Gage
  • Video input: NTSC/PAL
  • Protocols: J1939, NMEA 2000 (GPS), CANOpen protocol support
  • Connection: 5 Deutsch DT 6-pin connectors
  • Keyboard: 10 tactile buttons
  • USB 2.0 host (full speed)
  • Output Digital: (1) capable of syncing 500mA
  • Inputs: (3) 0-5 VDC analog inputs. (1) input configurable to support measurement frequencies from 2Hz - 10kHz and PWM values from 0-100% duty cycle.
  • Operating Temperature: -40°C to +85°C (-40°F to +185°F)
  • Storage Temperature: -40°C to +85°C (-40°F to +185°F)
  • Protection: IP67, front and back
  • Emissions: IEC 60945, 95/54/EC
  • Immunity: SAE J1113, ISO 11452
  • Vibration: Random vibration, 7.86 Grms (5-2000 Hz), 3 axis
  • Shock: +/- 50G in 3 axis
  • Dimensions: 8.37 x 6.0 in. (212.5 x 152.3 mm) landscape
  • Unit Depth: 3.57 in. (90.8 mm)
  • Case material: Polycarbonate back case
  • Mounting: Front or Rear (Optional Gimbal Mount available 78-00-0697)

Additional Information

Product Condition NEW
upc No

Customer Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register