Shopping Cart: $0.00

Murphy Powerview Display Module PV101-C-M02

More Views

Murphy Powerview Display Module - Chinese - PV101-C-M02

Product Condition: NEW
Murphy Powerview Display Module PV101-C-M02
Estimated ship date: for orders by 3pm PT/6pm ET today Available for back order.

SSL Cerficate

The Murphy Powerview Display Module Chinese PV101-C-M02 is a multifunction tool that enables equipment operators to view standard engine and transmission parameters, as well as active and stored trouble codes. The display can show a single parameter or a four-parameter simultaneous display. Diagnostic capabilities include codes with text translation for the most common fault conditions. The enhanced alarm indicators have ultra-bright alarm and shutdown LED's (amber and red). The PV101-C-M02 display is compatible with all J1939 gages.

This PV101-C-M02 is the replacment for the discontinued PV101-A. The PV101-C-M02 has improved durability for the connectors and wiring harness.


  • Tier 4 Emissions Implementation - Three icons indicating Active Regeneration, Inhibit Regeneration, and Diesel Particulate Filter DPF) Restricted. Menu offers Auto DPF Regen and Request DPF Regen
  • OEM Menu - A password protected menu offers access to MODBUS Setup, Engine Speed Control ON/OFF, and other critical menu items that require restricted access
  • TSCI (Torque Speed Control) - Allows user to set run speed via CAN if supported by engine manufacturer
  • Additional 4-Up Screen - Allows user to have two 4-Up screens to toggle between. Second user configurable screen is defaulted to show Tier 4 Parameters; DEF Level (Diesel Exhaust Fluid Level), DPF Active Regen Status, Exhaust Filter Outlet Temp, and Exhaust Filter Inlet Temp.
  • Multiple language options − Russian, Czech, Brazilian Portuguese, Chinese, and Japanese models have been added to the line of existing languages (English, Spanish, French, German, and Italian)
  • Sender Input − select between backlight dimmer function or fuel level. Can be calibrated to use non-Murphy fuel senders
  • Service Reminders – 5 service reminders allow users to set hours for: Change Engine Oil, Change Air Filters, Change Hydraulic Oil, Service Engine, and Service Machine
  • Select Source Address – select the exact address the PV101 will claim on the Bus
  • Select CANBUS Data Rate – allows user to select CANBUS data rate
  • PV101-C Configuration Tool – PC tool allows users to create, view, edit and download configurations for the PV101
  • The PV101-C Display Gauges – Compatible with PVA and PVM gages, as well as additional J1939 I/O modules


  • Part No.: PV101-C-M02
  • Language: Chinese
  • Operating Voltage: 8 VDC minimum to 32 VDC maximum with optional PVM gages
  • Reversed Polarity: Withstands reversed battery terminal polarity indefinitely within operating temperatures
  • Operating Temperature: -40 to 85°C (-40° to 185°F)
  • Display Temperature: -29 to 85°C (-20° to 185°F)
  • Storage Temperature: -40 to 85°C (-40° to 185°F)
  • Environmental Sealing: IP68, ±5 PSI (± 34.4 kPa)
  • Power Supply Operating Current: (@ 14VDC) 52 mA min; 300 mA max • (@ 32VDC) 1A max (with LCD heater)
  • CAN Bus: SAE J1939 compliant
  • Case: Polycarbonate / polyester
  • Auxiliary RS485 Communications Port: User configurable as Modbus MASTER or Modbus RTU SLAVE • MASTER ACTIVE (default) drives optional PVA or PVM gages • SLAVE ACTIVE offers user adjustable communication parameters
  • Resistive Input: (user selectable as one of the following) Backlighting Potentiometer: 1 K Ohm, 1/4 W • Murphy Fuel Sender: 33 Ohm full, 240 Ohm empty set standard from factory for use with Murphy fuel sender. Programmable for use with non-Murphy fuel senders
  • Clamp: PBT
  • Connectors: 6-pin Deutsch DT Series
  • Maximum Panel Thickness: 3/8 inch (9.6 mm)
  • Shipping Weight: 1 Lb. (450 g.)
  • Shipping Dimensions: 5 x 6 x 6 in. (127 x 152 x 152 mm)

Additional Information

Product Condition NEW
upc No

Customer Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register