Shopping Cart: $0.00

Trumeter Predetermining Counter 7922

More Views

Trumeter 6 Digit Electronic Predetermining Programmable Counter 2 Presets with Dual Output - 7922

Product Condition: NEW
Trumeter Predetermining Counter 7922
Estimated ship date: for orders by 3pm PT/6pm ET today Available for back order.

SSL Cerficate

The Trumeter Electronic Predetermining Programmable Counter 7922 is a 6 digit supertwist LCD programmable preset counter with prescaler, quadrature input and EEPROM data storage in an IP65 DIN case.


  • Simple programming via menu driven display
  • Quadrature Input
  • High visibility supertwist LCD display can be viewed from any angle
  • Backlight programmable ON, OFF or AUTO
  • 40 years data retention with no power
  • Programmable decimal point up to 3 places
  • Operates from 85-265VAC or 10-26VDC
  • 12VDC output to drive a sensor (when AC powered)
  • Opto-isolated inputs
  • Wide range of prescaling
  • Output relay contacts rated at 5A
  • Output can be set to latch or pulse with programmable pulse duration
  • Environmental protection to IP65
  • Standard DIN housing
  • CE, UL and cUL approved



  • Part No.: 7922
  • Supply Voltage: 85 – 265VAC or 10 – 26VDC at 100mA
  • Auxialiary Output Supply: 12VDC ± 10% @ 100mA (when operating from AC supply)
  • Display: 2 rows of 6 digits, supertwist black on silver LCD with yellow/green LED backlight. Upper row 7mm (0.28in) high indicates count, Lower row 4mm (0.16in) high indicates P1/P2 preset point. Also Relay 1 Active annunciator
  • Backlight Control: Programmable to Always ON, Always OFF or AUTO (ON for 30s following last keypress)
  • Preset Points: Two user selectable preset points 1 – 999999
  • Count Inputs:
    • Voltage Opto-isolated 10 – 30VDC
    • Quadrature and uni-directional
    • Input A (quadrature and uni-dir. count) NPN or PNP
    • Input B (quadrature and UP/DOWN in uni-dir. mode)
    • Maximum input frequency 10kHz
    • Duty cycle Maximum 60:40 or 40:60 mark/space ratio
    • Prescaler Multiply 0.00001 – 9.99999, default 1.00000
    • Divide 1 – 99999, default 00001
  • Manual Reset: Can be disabled on installation or remotely reset
  • Remote Reset: Contact closure or pulse (15 ms response time)
  • Automatic Reset: Programmable for automatic or Manual/Remote reset
  • Data Retention: 40 years minimum
  • Output Relays: Contact Connection. Both individually programmable as NO or NC SPST. Contact Rating 5A 260VAC/30VDC 1300VA/150W
  • Operating Temp:-10°to +60°C
  • Storage Temp: -20°C to +70°C
  • Environmental Pritection: IP65 when properly installed using the sealing gasket supplied (without bezel)

Additional Information

Product Condition NEW
upc No

Customer Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register