This is a 6 Pin Y-Cable Connect Kit. Make sure this is the right cable for your vehicle by looking at your connector port and consulting the table below. The Y-Cable makes it possible for you to have a connector port available for running diagnostics while your RoadLog is connected.
For vehicles with either no diagnostic connectoror a special OEM connector, RoadLog will need to be installed using the Open Wire direct wiring installation cable kit. Look at your truck to be sure, but as a rule:
|Your Vehicle is:||The Most Common Cable Connection||Part Number:|
|2007 - Current||9 pin connection||3290-90100100|
|2002-2006||6 pin or 9 pin connection||3290-90100200 3290-90100100|
|1996-2001||6 pin connection||3290-90100200|
|1992-1995 with Fuel Injection||6 pin or special OEM or no connector||3290-90100200 (6 pin)|
|Light Duty Trucks and Vans||OBD II connector||3290-90100500
Standard Cable vs Y-Cable
• The standard cable provides quick plug-and-play installation,but it occupies the diagnostic port and must be disconnected to perform diagnostics with a service tool
• The Y-cable takes slightly longer to install, but retains an open port for fast diagnostics hook-up and provides a cleaner looking installation. The Y-cable contains two diagnostic connectors. One replaces your existing diagnostic connector, and the other plugs into the existing diagnostic connector behind the dash
To hardwire into the vehicle- choose the Open Wire Direct Wiring kit. Some owners prefer the hardwire installation to retain the original appearance of the cab or to provide a theft deterrent.