The WWF wiper system provides a totally self-contained oscillating shaft which requires no external linkage. The WWF motor's marine quality sealed casing makes it ideal for all service vehicles. All parts exposed to weather are corrosion resistant.
An O ring between the oscillating shaft and its bearing stud prevents water from entering. A worm gear on the armature shaft turns a large molded drive gear.
This motor is 2-speed. You have a choice of wiper angle sweeps and park orientation. We can adjust these settings for you.. Just choose what you need from above.
If you prefer to set it yourself you can easily do this. The WWF motor wipe angle can be adjusted by removing the gear box cover and moving the lever plate pin to the correctly labeled hole. Left or right hand park can be achieved by changing the orientation of the gear plate with regard to position 1 and position 2.
This CE Certified version of the popular 2 speed WWF Wiper Motor comes in black (white is also available). Image shows 12V, but this listing is for a 24V
- 24 Volts
- 1.5" Shaft
- 110 degree wipe angle (adjustable)
- Right-hand park (adjustable to left-hand)
- Low speed: 40rpm
- High speed: 60rpm
- Recommended to fuse @ 12 Amps
- Terminals: 1/4" male blade
- Wiring: 16 WG, 7" leads
- Wire insulation: red=park, green=low speed, white = ground, blue = high speed
WWF CE motors default at a 110° wipe angle that can be adjusted to one of these 6 different wipe angles:
- 40 degrees
- 50 degrees
- 60 degrees
- 70 degrees
- 80 degrees
- 90 degrees
- 100 degrees
- 110 degrees
- Rear-window, motor homes, RV
- Off-highway constructions equipment
- Agricultural equipment
- Service vehicles