The WWF wiper system is for medium duty applications, these wiper motors offer reliable performance, driving arms and blades up to 600mm / 24”. The long-time industry standard is CE certified, can be adjusted to left hand or right hand park, and can be set to wipe angles of 40, 50, 60, 70, 80, 90, 100, and 110 degrees.
An O ring between the oscillating shaft and its bearing stud prevents water from entering. A worm gear on the armature shaft turns a large molded drive gear.
You have a choice of wiper angle sweeps and park orientation. We can adjust these settings for you. Just choose what you need from above.
If you prefer to set it yourself you can easily do this. The WWF motor wipe angle can be adjusted by removing the gear box cover and moving the lever plate pin to the correctly labeled hole. Left or right hand park can be achieved by changing the orientation of the gear plate with regard to position 1 and position 2.
- motor torque: 15 Nm
- motor voltage: 12V
- low speed: 35 sweeps/min
- high speed: 55 sweeps/min
- park circuitry: coast-to-park
- park positions: adjustable: right
- case: powder coated aluminum; white or black
- weight: 1.1 kg / 2.4 lbs
- shaft construction: stainless steel with brass housing
- shaft lengths: available in 3.5"
- shaft type: 1/2” drum
- grounding: isolated, white wire
- fusing: 12 amps minimum
- wiring: 16 AWG, 7” leads
- wire insulation:
- red = park
- green = low speed
- white = ground
- blue = high speed
- packaging: individually boxed
WWF motors default at a 110° wipe angle that can be adjusted to one of these 6 different wipe angles:
- 40 degrees
- 53 degrees
- 65 degrees
- 85 degrees
- 100 degrees
- 110 degrees