- 0.36 LBS
- Special Order Available:
- Increments of 1
The SD85 is used when the solenoid is duty cycled for short time periods such as two-position throttle operation. It also provides enhanced operational control for normal on-off applications. Using the SD85 ensures the energize coil is only powered for one to two seconds with each operation. If the plunger does not seat in that time, it is highly unlikely it will seat. The SD85 activates both coils of the solenoid for a short time then de-energizes the Energize coil. The Hold-in coil is energized as long as the signal to the SD85 is active. This ensures long life of the RP solenoid.
SD85 solenoid drive time delay is available to greatly reduce possibility of coil burnout And facilitate low current piloted operation. Input voltage: 8 to 30 VDC. Shipping Weight: 6.4 oz. (0.2 kg. See image #5 for dimensions.
Product Condition: NEW