The Alemite Straight Thread-Forming Fitting 369584 has a special tapered drive thread to reshape the material in an untapped hole to provide 13 a leakproof seal. This model is most effectively installed by spinning into the untapped hole, but may be driven straight into the untapped hole. This product can be replaced by any standard threaded fitting or by another thread-forming fitting.
- Threads provide strong seal
- Exceeds 72-hour salt-spray test
- Part No.: 369584
- Thread: 1/4"-28 Spl. Taper
- Type: Straight
- Hex Size: 5/16"
- Recommended Hole Size: .230 - .235
- Maximum pressure: 8,000 psi