ENM Hour Meter/Counter T39FC48

More Views

ENM 6-Digit AC/DC Electronic LCD Hour Meter/Counter Combo 85 - 265V AC/90 - 360V DC - Round SAE Bezel - T39FC48

Product Condition: NEW
ENM Hour Meter/Counter T39FC48
Estimated ship date: for orders by 3pm PT/6pm ET today Available for back order.
$115.38

SSL Cerficate

The ENM Hour Meter/Counter T39FC48 is ideal for any application that requires recording both time measurement and event count for maintenance schedule. The two displays meter can operate independently or in parallel. This compact tamper-proof meter is protected from the environment to provide years of service. Accumulated time hours and counts are stored on powerless non-volatile data backup using CMOS EEPROM technology, where small space and reliable meter is required with memory that does not rely on battery.


NOTE:

  • If the display is an hour meter then it will require a constant power source. If the display is a counter then it will require a pulse input with minimum duration of 50 ms.


TO POWER UP THE METER:

  • Connect pin #6 and pin #1 to the AC line power source for AC unit or DC unit to DC power source on the back of unit. (Polarity insensitive)
  • Turn power on, the meter should display (00 for counter, 0.0 for hour meter) on both LCD screen


TO ACTIVATE OR ENABLE METER:

  • Connect hot side (for AC unit)/positive (for DC unit) to pin #8 for top display
  • Connect hot side (for AC unit)/positive (for DC unit) to pin #9 for bottom display
  • The hour meter should start blinking/counter should increment once per pulse


TO RESET THE DISPLAY:

  • Connect pin #7 momentarily to the AC line (hot side), for DC unit to the positive power source to reset top display
  • Connect pin #10 momentarily to the AC line (hot side), for DC unit to the positive power source to reset bottom display


INTERLOCK CONNECTION:

  • Connect pin #5 to the AC line (hot side), for DC unit positive power source to prevent unauthorized personnel from resetting displays


PRODUCT FEATURES:

  • Quartz Crystal
  • High reliability
  • Made in the U.S.A.
  • Totally sealed IP67
  • Low operating current
  • Solid State Electronics
  • Low cost and small size
  • ISO 9001:2000 Certified
  • Non-volatile memory (no battery)
  • 10 pins connector wire harness included
  • Polarity insensitive for the DC power input
  • Interlock input (the reset input are disabled)
  • Wide operating voltage and temperature range


PRODUCT SPECIFICATIONS:

  • Part No.: T39FC48
  • Display Reading: 99999.9 Hours meter • (00 to 999999) Up counter • Hours only (999999) • Minutes and seconds (9999.59) • Hours and minutes (9999.59) • Hours, minutes and seconds (99.59.59) • Hours and 100th (9999.99) • Automatic recycle to zero
  • Digit Height: 6-digits • (.275”) (7 mm) LCD
  • Operating Voltage: 85 - 265V AC • 50/60 Hz • 90-360V DC
  • Count Speed: 20 C.P.S.
  • Power Consumption: Approximately 20MA • Maximum at 60V DC
  • Accuracy: Better than +/- 0.01% over entire range
  • Temperature: Standard -40 ˚C to +85 ˚C (-40 ˚F to +185 ˚F)
  • Vibration Resistance: Withstands 10 to 75Hz at 1 to 8 G’s
  • Mounting Configuration: Round SAE Bezel with push on retaining clip • Other mounting styles are also available • See reverse side
  • Dimensions: See image #2

Additional Information

Product Condition NEW
upc No

Customer Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register