Dynalco Tach Tape - TT-100

TAPE IS PRICED BY THE INCH

The Dynalco Tach Tape  TT-100 is a slotted, 1-inch (2.54 cm) wide, 1/16 inch (0.16 cm) thick strip of flexible magnetic polymer that provides speed and frequency measurements without large split gears, slotted shafts, holes drilled in flywheels, or other clumsy make-do arrangements, even on a smooth shaft or wheel. Pressure sensitive adhesive on back side allows fastening to a smooth shaft. Minimum shaft diameter: 2 inches (5.08 cm). It helps saves your time and money.

PRODUCT FEATURES:

• TT-100™ Dynalco Tach Tape is a strip of flexible magnetic polymer backed with a pressure sensitive adhesive. This adhesive adheres to a wide variety of surfaces, including most plastics and metals
• Because of its unique magnetization and arrangement of slots, a series of alternate magnetic poles is generated along the length of the tape. A Dynalco magnetic pickup becomes activated when placed perpendicular to the moving tape surface
• Figure 1 demonstrates that the Tach Tape performance is better than an 8-pitch gear when the air gap is larger than 0.050 inch (0.127 cm). This is especially welcome in cases where a small air gap is difficult to maintain, or space is too restricted to install split gears

PRODUCT SPECIFICATIONS:

• Dynalco Part No.: TT-100
• Temperature range: –30°F to +160°F (–34°C to +71°C)
• Gear pitch equivalent: Approximately 7 diametrical pitch
• Maximum continuous length: 100 feet (30 meters)
• Minimum usable length: 2 in. (5.1 cm)
• Tape dimensions: 1 inch wide X 1/16 inch thick (2.5 cm X 0.16 cm)

Product Condition: NEW