Shopping Cart: $0.00

Murphy Cascade Auto-Start/Stop Controller CD101

More Views

Murphy Cascade Auto-Start/Stop Controller - CD101

Product Condition: NEW
Murphy Cascade Auto-Start/Stop Controller CD101
Estimated ship date: for orders by 3pm PT/6pm ET today Available for back order.

SSL Cerficate

The Murphy Cascade Auto-Start/Stop Controller CD101 offers automatic start and stop control with easy configuration for a broad number of applications. This auto-start controller is designed to fit any engine-driven application requiring a simple and robust automatic start and stop sequence. Pumps, Compressors, Grinders, Power Units and Generators are just few of the industrial applications for the controller. The Cascade controller is fully compatible with all major engine types. Whether you are running mechanical or J1939 engines, the controller will work with your application.



  • Durability: Encapsulated to protect it against dirt, water and dust, along with a compression gasket to fully seal it to the panel. Cascade is rated NEMA4 and IP65
  • Low Battery Blackouts: Operates in total blackout for a minimum of two seconds
  • Compatibility: Accept MPU, AC Frequency and ECU speed signals and can operate with standard and J1939 engines
  • Inputs and Outputs: The Cascade Inputs and Outputs are ruggedly protected and fault tolerant
  • J1939 Ready: Works directly with Murphy’s J1939-ready PowerView gages, just plug and go, no sender is required



  • Part No.: CD101
  • Power input: 9-35VDC continuous - operates during total blackout for 2 seconds minimum
  • Power consumption: Sleep Mode (Manual): 1mA typical; Sleep Mode (Automatic): 4mA typical. Running Mode (Manual): 20mA typical; Running Mode (Automatic): 24mA typical
  • Operating/Storage temperature: -40 to 85°C; (-40 to 185°F)
  • Humidity: 0-100%, non-condensing
  • Housing: UV stabilized black polycarbonate and epoxy encapsulation. Weather tight and includes sealing gasket to keep moisture and debris out of enclosure. Properly mounted controller will maintain NEMA4 / IP65 rating of enclosure
  • Vibration: Rated to 6G
  • Impact: Rated to 10G
  • Inputs: Dedicated digital inputs for low oil pressure, high engine temperature, remote start, DC charge fail/Alternator fail. Two aux inputs are configurable for multiple functions
  • Outputs: 7 – 4 auxiliary, configurable (1A DC protected). 3 dedicated outputs for Crank, Fuel/ECU, Alternator excitation
  • Crank attempts: 3, 5, 10, Continuous
  • Crank Rest: 5-60 seconds, adjustable
  • Shutdown lockout time delay: 5, 10, 15, 20, 25, 30 seconds
  • Crank disconnect speed setting: Field settable 0-9999 RPM (16-60Hz AC freq input)
  • Overspeed/underspeed trip point setting: ±5 to 50% of nominal
  • Speed sensing inputs: Magnetic pickup (5-120VAC RMS / 0-10 kHz) & AC frequency (30-600VAC RMS / 16-80 Hz)
  • CANbus interface: Directly reads engine speed, & engine status data* from SAE-J1939 enabled engines
  • MODbus interface: In J1939 applications drives PVA series analog gages
  • Shipping Weight: 1 lb. (453 g) approximately
  • Shipping Dimensions: 5.1 x 6.7 x 1.6 inch (130 x 170 x 41 mm) approximately


*Engine status data limited to low oil pressure, high engine temperature, “Wait to start” status, Warning & Fault lamp information, and communication error.

Additional Information

Product Condition NEW
upc No

Customer Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register