- SKU:
- 77114454
- Weight:
- 0.50 LBS
- so_moq:
- 1
- so_qi:
- 1
- Estimated Special Order Ship Date:
- Approximately 2 - 3 Weeks
- Special Order Available:
- Increments of 1
- QPO:
- 0
- COO:
- MX
- MPN:
- 105697
Note: Gasket included, screws excluded (specify with order or purchase separately). All units provide isolated ground configuration, 240-33.5 ohms resistance. For sensors with low fuel level switch the trip point is at approximately 1/8 tank level. Tank shape is either round (R) or non-round (NR). Tank depths of greater than 24” may require supports.
PRODUCT FEATURES:
- Units fit in standard SAE 5-hole flange opening
- Ideal for most hydrocarbon-based liquid-sensing applications
- Rugged, heavy-duty function designed especially for O.E.M. off-highway, industrial and specialty vehicle applications
- Sealed SMT electronics
- Self-powered, draws power from the fuel gauge
- Immune to voltage variations, reverse polarity protected
- Robust extruded aluminum housing with baffles eliminates potential for disruptive fuel slosh
- Options include variable switch set points (for low fuel warning), lengths, flange types, integrated tubing & output signals
PRODUCT SPECIFICATIONS:
- Stewart Warner Part No.: 105697
- Tank Depth: 22.0"
- Tank Shape: Round
- Low Fuel Level Switch: No
- Housing: Extruded aluminum, reinforced, internally baffled
- Flange/Opening/Mounting: High-impact, chemical-resistant acetal, molded; standard SAE 5-hole flange (~42mm) diameter; 5-#10 sealing screws for mounting; heavy duty nitrile gasket
- Internal Configuration: Patented technology using a pulse-width-modulation output
- Connections: Two wires standard (flying leads), 18-gauge, color-coded: pink lead for sender ground, black lead for ground; optional blue lead for low fuel warning light Operating Voltage: Not voltage dependant (typically works with 12 or 24 volt gauge systems)
- Switch Set Point/Rating: Fixed @ 1/8 tank level; 0.5A DC switch current
- Accuracy: SAE J1810
- Operating temperature: -40°C to +85°C
- Operating media: Diesel fuels, hydraulic fluids, heating fuels, pure gasoline, petro
- Shock & vibration: Per SAE J1810
- Salt Spray: Per SAE J1810
- Water Leakage: Per SAE J1810
APPLICATIONS:
Suitability of application is the responsibility of the user. Use in “contaminated” fuels and in applications where the percentage of water-to-fuel exceeds approximately 5% may impede normal operating performance and will void warranty. Follow factory guidelines for installation to assure correct mounting of flange. Cup supports or similar devices are recommended for non-vertical mounting in tank for most units or where units exceed 24”. Unit should be installed approximately .75” from bottom of tank. Set point for empty is 1/8 tank level.
Product Condition: NEW
