Murphy 0-15 PSI Mechanical Differential Pressure Swichgage w/ Knob Adjusting Face Contact - A20DP-K-15

The Murphy 0-15 PSI Mechanical Differential Pressure Swichgage with Knob Adjusting Face Contact A20DP-K-15 is a diaphragm-actuated differential pressure-indicating gage with a built in electrical switch. This switch is used for tripping alarms and/or shutting down equipment. The swichgage A20DP-K-15 is intended to monitor and indicate oil, fuel or water filter restriction and can reduce the risk of dangerously high pressure which may rupture the filter, resulting in contaminants entering the system. This model has a polycarbonate case and are sealed from the environment.

The gage pointer acts as a pressure indicator and as one switch pole which completes a circuit when it touches the adjustable limit contact. Contacts have self-cleaning motion to ensure electrical continuity.

FEATURES:

• 2 inch/51 mm Dial
• Polycarbonate Case
• Monitors Engine Oil and Fuel Filters
• Actuates Alarm or Shutdown System When Filter Becomes Clogged
• Combination Indicating Gage and Limit Switch
• Actuates Filter Backwash
• Signals Coolant Loss or Aeration On Engine Water Pump
• Knob Adjusting Face Contact

PRODUCT SPECIFICATIONS:

Part No.: A20DP-K-15
Range: 0-15 psi (0-103 kPa ) [0-1.0 bar]
Maximum Static Pressure: 200 (1.4) [14]
Maximum Differential Pressure: 30 (207) [2.0]
Contact Setting: 10 (69) [0.8]
Dial: White on black, dual scale
Case: polycarbonate
Bezel: Polished stainless steel
Lens: Polycarbonate, high-impact
Process Connection: 1/8-27 NPTM brass
Sensing Element: Beryllium copper diaphragm
Gage Accuracy: ±3% maximum across scale
Temperature Range: Ambient: -40°F (-40°C) thru 150°F (66°C);Process: -40°F (-40°C) thru 250°F (121°C)
Adjustable Limit Contact: SPST contact; pilot- duty only, 2 A @ 30 VAC/DC; closed when the low limit is met, open when pointer is in normal operating range. Contacts are gold flashed silver
Limit Contact Adjustment: by 1/16 in. hex wrench thru 100% of scale
Limit Contact Terminals: number #4 screw terminals
Unit Weight: 9 oz. (0.25 kg)
Unit Dimensions: 3 x 2-3/4 x 2-3/4 in. (76 x 70 x 70 mm)

Note: Actual image not shown.