Murphy Powerview Display Module - Czech - PV101-C-M05

Request Quote
Customer Reviews
0.91 LBS
Estimated Special Order Ship Date:
Special Order (ships approximately 2-3 Weeks)
Special Order Available:
Increments of 1

The Murphy Powerview Display Module Czech PV101-C-M05 is a multifunction tool that enables equipment operators to view standard engine and transmission parameters, as well as active and stored trouble codes. The display can show a single parameter or a four-parameter simultaneous display. Diagnostic capabilities include codes with text translation for the most common fault conditions. The enhanced alarm indicators have ultra-bright alarm and shutdown LED's (amber and red). The PV101-C-M05 display is compatible with all J1939 gages.

This PV101-C-M05 is the replacment for the discontinued PV101-A. The PV101-C-M05 has improved durability for the connectors and wiring harness.


  • Tier 4 Emissions Implementation - Three icons indicating Active Regeneration, Inhibit Regeneration, and Diesel Particulate Filter DPF) Restricted. Menu offers Auto DPF Regen and Request DPF Regen
  • OEM Menu - A password protected menu offers access to MODBUS Setup, Engine Speed Control ON/OFF, and other critical menu items that require restricted access
  • TSCI (Torque Speed Control) - Allows user to set run speed via CAN if supported by engine manufacturer
  • Additional 4-Up Screen - Allows user to have two 4-Up screens to toggle between. Second user configurable screen is defaulted to show Tier 4 Parameters; DEF Level (Diesel Exhaust Fluid Level), DPF Active Regen Status, Exhaust Filter Outlet Temp, and Exhaust Filter Inlet Temp.
  • Multiple language options − Russian, Czech, Brazilian Portuguese, Chinese, and Japanese models have been added to the line of existing languages (English, Spanish, French, German, and Italian)
  • Sender Input − select between backlight dimmer function or fuel level. Can be calibrated to use non-Murphy fuel senders
  • Service Reminders – 5 service reminders allow users to set hours for: Change Engine Oil, Change Air Filters, Change Hydraulic Oil, Service Engine, and Service Machine
  • Select Source Address – select the exact address the PV101 will claim on the Bus
  • Select CANBUS Data Rate – allows user to select CANBUS data rate
  • PV101-C Configuration Tool – PC tool allows users to create, view, edit and download configurations for the PV101
  • The PV101-C Display Gauges – Compatible with PVA and PVM gages, as well as additional J1939 I/O modules


  • Part No.: PV101-C-M05
  • Language: Czech
  • Operating Voltage: 8 VDC minimum to 32 VDC maximum with optional PVM gages
  • Reversed Polarity: Withstands reversed battery terminal polarity indefinitely within operating temperatures
  • Operating Temperature: -40 to 85°C (-40° to 185°F)
  • Display Temperature: -29 to 85°C (-20° to 185°F)
  • Storage Temperature: -40 to 85°C (-40° to 185°F)
  • Environmental Sealing: IP68, ±5 PSI (± 34.4 kPa)
  • Power Supply Operating Current: (@ 14VDC) 52 mA min; 300 mA max • (@ 32VDC) 1A max (with LCD heater)
  • CAN Bus: SAE J1939 compliant
  • Case: Polycarbonate / polyester
  • Auxiliary RS485 Communications Port: User configurable as Modbus MASTER or Modbus RTU SLAVE • MASTER ACTIVE (default) drives optional PVA or PVM gages • SLAVE ACTIVE offers user adjustable communication parameters
  • Resistive Input: (user selectable as one of the following) Backlighting Potentiometer: 1 K Ohm, 1/4 W • Murphy Fuel Sender: 33 Ohm full, 240 Ohm empty set standard from factory for use with Murphy fuel sender. Programmable for use with non-Murphy fuel senders
  • Clamp: PBT
  • Connectors: 6-pin Deutsch DT Series
  • Maximum Panel Thickness: 3/8 inch (9.6 mm)
  • Shipping Weight: 1 Lb. (450 g.)
  • Shipping Dimensions: 5 x 6 x 6 in. (127 x 152 x 152 mm)

Product Condition: NEW
Murphy Powerview Display Module PV101-C-M05

Shop Products

“More than just a parts website. The account manager helped us plan ahead with inventory so we could avoid disruptions with our production schedule. Their engineering resources were available to assist with our application requirements. Highly recommend this team!”
— Satisified Customer


Shoot us an email or call (503) 802-1370

Contact Us