- SKU:
- 77122184
- Weight:
- 0.58 LBS
- so_moq:
- 1
- so_qi:
- 1
- Estimated Special Order Ship Date:
- Special Order (ships approximately 2 Weeks)
- Special Order Available:
- Increments of 1
- QPO:
- 0
- COO:
- MX
- HarmonizeCode:
- 8536.90.8085
- MPN:
- 7146
The Blue Sea Systems Surface Mount 187 Series Circuit Breaker 7146 provides circuit protection for 120A loads when switching and circuit protection are both required. NOTE: Do not use as a switch where high inrush currents are expected.
PRODUCT FEATURES:
- Combines switching and circuit protection into a single device*
- Clear, single lever operation
- "Trip Free" design cannot be held "ON" during fault current condition
- Waterproof
- Recessed mounting holes for clean appearance
- Large Clearance around terminal studs accept heavy gauge wire lugs
- Robust 5/16 M8 terminals provide high torque connections
- Large lever with vertical/horizontal orientation provides indication of trip status
- Ignition protected - Safe for installation in vehicles where gasoline vapors may be present, including boats
- CE marked
- Meets SAE J1171 external ignition protection requirements
- IP66—protected against powerful water jets (see inside back cover)
PRODUCT SPECIFICATIONS:
- Blue Sea Systems Part No.: 7146
- Amperage: 120A
- Maximum Voltage: 48V DC
- Mounting: Surface Mount
- Circuit Breaker Type: Thermally responsive Bi-metal blade
- Interrupt Capacity: 5000A @ 12V • 3000A @ 24V • 1500A @ 42V
- Minimum Operating Temperature: -40° C
- Maximum Operating Temperature: 85° C
- Case Material: Thermoset Polyester
- Circuit Breaker Class: Type III - switchable/manual reset - trip free
- Mounting Hole: Accept #10 (M5) Screw
- Terminal Stud Size: 5/16" - 18
- Terminal Stud Torque: 75 in-lb (8.47 Nm)
- Weight: 0.58lb (0.26 kg)
- Dimensions: See image #2
Product Condition: NEW
