- SKU:
- 77172599
- Weight:
- 0.45 LBS
- so_moq:
- 1
- so_qi:
- 1
- Special Order Available:
- Increments of 1
The Murphy Pressure Transmitter PXT-100 has a step-down between the transmitter body and hex coupling. REPLACED BY PART PXT-K-100.
PRODUCT FEATURES:
- Piezoresistive Pressure Transmitter
- Corrosion Resistant Construction
- High Stablity
- Enclosure: IP65 or better
- Body: 316L Stainless Steel complies with NACE MR0175
- Wetted Parts: 316L Stainless Steel complies with NACE MR0175
- Environmental Effect (Humidity): No effect for 0-95%, Non-condensing
- Mounting: Transmitter can be installed in any axis. Transmitter position has negligible
- effect on performance as long as it is perpendicular to the flow being monitored.
- Shock Resistance: 1000g per IEC 60068-2-6 (Mechanical Shock)
- Vibration Resistance: 20G per IEC 60068-2-6 (Vibration under resonance)
- Wiring Protection: Protected against reverse polarity and short circuit, 48 VDC Maximum
- Supply Voltage: 8 - 30 VDC (Typically 24 VDC)
- Insulation: Greater than 10MΩ @ 300 VDC
- Electromagnetic Compatibility (EMC): Standards; EN 61000-6-2:2005, EN 61000-6-
- 3:2007, EN 61326-2-3:2006
- Voltage Surge/Spike Protection: Protection against a 600 Volt spike per IEC 60-2
PRODUCT SPECIFICATIONS:
- Part No.: PXT-100
- Output Signal: 4-20mAdc
- Range: 0-100 psig
- Red Cable Color: Power Connection
- Blue Cable Color: Signal Connection
- Black Cable Color: Case Ground Connection
- Orange, Yellow, White Cable Color: N/A
- Operating Temperature: -30 to 176°F (-30 to 80°C)
- Compensated Temperature Range: -20 to 160°F (-29 to 71°C)
- Process Connection: 1/4 NPT female with 7/8” Hex Nut
Product Condition: NEW
