- SKU:
- 77174962
- Weight:
- 5.20 LBS
- so_moq:
- 1
- so_qi:
- 1
- NA:
- NA
- Special Order Available:
- Increments of 1
- QPO:
- 0
- MPN:
- 40700002
The Murphy Rack Puller 12V RP75-12 is a semi-automatic device that provides a pulling force to initiate shutdown of diesel engines and equipment. The RP75 connects to the injection pump or air intake shut-off lever via a cable (chain optional). A coil spring, within the RP75, is reset manually and is held in place by an electromagnet. When the Swichgage detects a malfunction, the electromagnetic circuit is interrupted through a Magnetic Switch, which releases the coil spring that pulls the cable/chain to actuate shutdown. The spring, when fully compressed, exerts a pull of 30 lbf (133 N).
This RP75-12 is compatible with all Swichgage instruments.
FEATURES:
- Pulls Injection Pump or Air Intake Shut-off Lever
- 30 lbf (133 N) Operating Force
- Operates on Signal from Swichgage Installed on the Engine or Driven Equipment
- The 12 Volt DC RP75-12 is compatible with all Murphy SWICHGAGE instruments.
PRODUCT SPECIFICATIONS:
- Part No.: RP75-12
- Operating Force: 30 lbf (133 N) maximum, 10 lbf (44 N) minimum
- Coil Voltage: 12 VDC
- Coil Resistance: 32.2 ohms
- Length of Travel: 1-7/8 in. (48 mm)
- Control Linkage Cable: 4ft. (1.22 m)
- Shipping Weight: 5 lbs 3 oz. (2.4 kg)
- Shipping Dimensions: 9-1/4 x 8-1/4 x 5-1/4 in. (235 x 210 x 133 mm)
Product Condition: NEW
Murphy 12 Volt Rack Puller RP75-12
